The users who are familiar with the talaş briket makinesi knows that the heating ring is an important part of the sawdust briquette machine. And after a long time using, the heating rings will be damaged and should be replaced. However, most of the users are don’t know how to connect the heating rings. The following steps can help you to connect them correctly.
Step 1: take out three heating rings
There are six labels with numbers on them in picture 1, please pay attention and follow the indication.

Step 2: take a shorter high-temperature resistant wire

Step 3: 1 and 3 are connected by a truncated segment of the short line to the middle ( picture 3)

Step 4: connect 3 to 5 like picture 4

Step 5: take 3 high-temperature resistant wires of 1.8m

Step 6: connect these 3 high-temperature resistant wires of 1.8m to 2, 4 and 6 respectively

Step 7: install 6 porcelain caps onto the six nuts

Step 8: connect 3 long heating wires to the heating part in the control cabinet of the following drawing of sawdust briquette machine.


If you still have something want to know about the heating ring and the sawdust briquette machine, you can leave a message on our website or contact us directly at Tel/ WhatsApp/ Wechat +86 15838192276.