Algumas precauções durante a operação do secador comercial de serradura

A secador de serradura comercial, also called secador de fluxo de ar, is commonly used equipment for a 2-ton daily charcoal production line. Sawdust drying is essential for producing high-quality sawdust charcoal. What issues need to be paid attention to when using a sawdust dryer in order to maximize its working performance? Shuliy charcoal machine manufacturers are here to share with you useful tips.

Por que usar a máquina de secagem de serragem para fazer carvão?

A secagem de serradura é o segundo processo numa linha de produção de carvão. Matérias-primas com teor de humidade adequado processadas pelo secador comercial de serradura são uma condição prévia para a produção de carvão de alta qualidade. A secagem excessiva de matérias-primas como serradura pode causar fissuras longitudinais nos bastões de formação extrudados, e até causar incêndios graves nas briquetas formadas.

At this time, we can even mix the raw materials into sawdust. Excessive moisture in the raw materials usually causes transverse cracks in the forming rods, accompanied by back-blow air from the hopper, and sounds during sawdust extruder máquina operation. In this way, raw materials with large moisture content need to be dried by a dryer.

Máquina de secagem de serragem Shuliy’características principais

A qualified serragem secador máquina has at least the following components: a fuel furnace, a lowering roller, a reduction motor, a number of pipes and elbows containing insulation layers, a fan, and a separator. The sawdust dryer also has certain requirements for the volume of raw materials and generally requires a particle diameter of less than 8mm.

But the size of the raw materials should not be too small, otherwise, the raw materials will easily burn in the pipeline. Most of our foreign customers’ charcoal processing plants use hot air duct dryers. The advantages of this commercial sawdust secador are direct heating, fast drying speed, foldable installation, and space-saving. The principle is to let the wet raw materials mix with the high-temperature airflow in the pipeline, and finally obtain the raw materials with the required moisture content through the separator.