The 商业锯末干燥机, also called 气流干燥机, is commonly used equipment for a 2-ton daily charcoal production line. Sawdust drying is essential for producing high-quality sawdust charcoal. What issues need to be paid attention to when using a sawdust dryer in order to maximize its working performance? Shuliy charcoal machine manufacturers are here to share with you useful tips.

为什么使用锯末干燥机制作木炭？

锯末干燥是木炭生产线中的第二道工序。经过商业锯末干燥机处理的水分合格的原材料，是生产高质量木炭的前提。锯末等原材料过度干燥可能导致挤压成型棒出现纵向裂纹，甚至严重引起成型块着火。

带电干燥机的锯末干燥
带电干燥机的锯末干燥

At this time, we can even mix the raw materials into sawdust. Excessive moisture in the raw materials usually causes transverse cracks in the forming rods, accompanied by back-blow air from the hopper, and sounds during sawdust extruder 机器 operation. In this way, raw materials with large moisture content need to be dried by a dryer.

舒利锯末干燥机’特点

A qualified 锯末 干燥机 机器 has at least the following components: a fuel furnace, a lowering roller, a reduction motor, a number of pipes and elbows containing insulation layers, a fan, and a separator. The sawdust dryer also has certain requirements for the volume of raw materials and generally requires a particle diameter of less than 8mm.

But the size of the raw materials should not be too small, otherwise, the raw materials will easily burn in the pipeline. Most of our foreign customers’ charcoal processing plants use hot air duct dryers. The advantages of this commercial sawdust 干燥机 are direct heating, fast drying speed, foldable installation, and space-saving. The principle is to let the wet raw materials mix with the high-temperature airflow in the pipeline, and finally obtain the raw materials with the required moisture content through the separator.