如何注意木材破碎机轴承的磨损？

Wood Crusher or Wood Shredder is the common wood branch processing equipment used in the industrial production industry. It can grind wood, branches, waste building materials, and straws to a large extent. The crushed sawdust can be used as raw materials to produce new building materials and cardboard. The wood crusher can be used to recover the old wood that has been removed from the building, and then processed into various usable wood materials for comprehensive utilization according to market demand. However, during the working process of the wood crusher, we should pay attention to the maintenance of the wood processing machines.

Why should we pay attention to the wood crusher bearings?

在我们长期运行的木厂生产作业中，轴承会承受很大的压力。因此，木材粉碎机经过一段时间的高强度生产作业后，就会出现轴承的磨损。那么每当木材粉碎机生产运行一段时间后我们就要对轴承进行维护和保养，那么轴承如果出现损坏我们应该如何更换呢？

In the process of operating the wood shredder as a whole, some professional operation techniques are used to ensure that the wood crusher can have good working efficiency and ensure the service life of the bearing, which can increase the output while reducing the production cost. If the wood crushing machine is not properly configured during the production process or if it is not regularly sprayed with the lubricating oil, it will accelerate the wear of the bearing.

Therefore, to prolong the service life of the bearing, firstly, the corresponding measures to protect the bearing must be done. For example, the lubricant is injected once every 300 hours to ensure that the bearing is in a good state for production operations and to avoid excessive wear. We should not only pay attention to the protection of the bearing parts of the wood crusher, but also the other vulnerable parts inside the wood shredder should be carefully maintained and maintained.

How to maintain the wood crusher?

1. Before starting the wood shredder, it is necessary to develop a good habit of checking the machine. First check whether the screw and the belt are loose, whether the rotation direction is correct, and whether there is a jam in the machine.
2. 按机型参数设定生产，禁止超负荷生产，以免损坏机器。
3. 对于容易磨损的部件，要经常检查，发现磨损过度的部件应及时更换。
4. 保持机器处于良好的润滑状态。一般情况下，轴承温度不超过70度。主轴承每周加注黄油和二硫化钼一次。