Varias precauciones durante la operación de la máquina secadora de aserrín comercial

El máquina secadora de aserrín comercial, also called secador de flujo de aire, is commonly used equipment for a 2-ton daily charcoal production line. Sawdust drying is essential for producing high-quality sawdust charcoal. What issues need to be paid attention to when using a sawdust dryer in order to maximize its working performance? Shuliy charcoal machine manufacturers are here to share with you useful tips.

¿Por qué usar la máquina secadora de aserrín para hacer carbón vegetal?

El secado de aserrín es el segundo proceso en una línea de producción de carbón. Las materias primas con humedad adecuada procesadas por la máquina secadora de aserrín comercial son un requisito previo para producir carbón de alta calidad. El secado excesivo de materias primas como el aserrín puede causar grietas longitudinales en las varillas de formación extruidas, e incluso causar que las briquetas de formación se incendien severamente.

At this time, we can even mix the raw materials into sawdust. Excessive moisture in the raw materials usually causes transverse cracks in the forming rods, accompanied by back-blow air from the hopper, and sounds during sawdust extruder máquina operation. In this way, raw materials with large moisture content need to be dried by a dryer.

Máquina secadora de aserrín Shuliy’características

A qualified virutas de madera secador máquina has at least the following components: a fuel furnace, a lowering roller, a reduction motor, a number of pipes and elbows containing insulation layers, a fan, and a separator. The sawdust dryer also has certain requirements for the volume of raw materials and generally requires a particle diameter of less than 8mm.

But the size of the raw materials should not be too small, otherwise, the raw materials will easily burn in the pipeline. Most of our foreign customers’ charcoal processing plants use hot air duct dryers. The advantages of this commercial sawdust secador are direct heating, fast drying speed, foldable installation, and space-saving. The principle is to let the wet raw materials mix with the high-temperature airflow in the pipeline, and finally obtain the raw materials with the required moisture content through the separator.